| STANDARD
DESIGN OF PIPERACK / PIPE SUPPORTS ( Following details are included in Super Civil CD ) |
|
| 1 | CANTILEVER PIPE SUPPORT { H = 3.7 M } |
| 2 | PORTAL TYPE PIPE SUPPORT { H = 3.7 M } |
| 3 | CANTILEVER PIPE SUPPORT { H = 6.0 M } |
| 4 | CANTILEVER PIPE BRACKET FROM BRICK WALL { W =1.5 } |
| 5 | CANTILEVER PIPE BRACKET FROM RC COL/BEAM/WALL { W =1.5 } |
| 6 | CANTILEVER PIPE BRACKET FROM RC BEAM { W =1.5 } |
| 7 | INVERTED PORTAL TYPE PIPE SUPPORT |
| 8 | PROPPED CANTILEVER TYPE PIPE SUPPORT |
| 9 | CANTILEVER PIPE SUPPORT ACROSS BEAM WIDTH |
| 10 | BALANCED CANTILEVER TYPE PIPE SUPPORT |
| 11 | CANTILEVER " T " TYPE PIPE / CABLE RACK |
| 12 | BRACKET TYPE PIPE / CABLE RACK |
| 13 | 2 TIER BRACKET TYPE PIPE / CABLE RACK |
| 14 | DETAILS OF 2 TIER CANTILEVER PIPE / CABLE RACK |
| 15 | DETAILS OF INVERTED PORTAL TYPE PIPE / CABLE RACK |
| 16 | DETAILS OF PORTAL TYPE PIPE / CABLE RACK |
| 17 | DETAILS OF 3 TIER CANTILEVER PIPE RACK |
|
|
|
